![]() ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUEġ Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 46Ģ Throughput_Performance 0x0026 252 252 000 Old_age Always - 0ģ Spin_Up_Time 0x0023 090 090 025 Pre-fail Always - 3158Ĥ Start_Stop_Count 0x0032 078 078 000 Old_age Always - 22556ĥ Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0įirst, the “start of information section” informs us that SMART support is available and enabled. That’s good.Īfter that, we read that the “SMART overall-health self-assessment test result” is “PASSED”. That’s fine, it means that the disk is still usable. “Auto Offline Data Collection” periodically updates specific SMART attributes, but it could impact performance. It’s disabled, and we can leave it that way. However, if we want to enable it, we can run “ smartctl -s on -o on -S on /dev/sdc”. įurther on, we see the estimated times for performing the self-tests: 2 minutes for the short one and nearly 4 hours (215 minutes) for the extended one. In the continuation of this tutorial, we will do a short test. We should proceed with caution with the extended tests because their duration may impact disk wear. On larger disks, they can take up to ten hours or more. The “Vendor Specific SMART Attributes with Thresholds “ table reported by smartctl in the previous section relies on the Smartmontools’ database for ATA/SATA drives. The -P show option displays if the drive is in the database, and if so, its presets, then exits: # smartctl -P show /dev/sdc Instead, SCSI/SAS and NVMe drives do not provide ATA/SATA-like SMART Attributes, so the database doesn’t contain any entries for these drives. Smartctl 7.1 r5022 (local build)Ĭopyright (C) 2002-19, Bruce Allen, Christian Franke, Drive found in smartmontools Database. Match smartmontools Drive Database entry: ![]() MODEL FAMILY: Seagate Samsung SpinPoint M8 (AF)ĪTTRIBUTE OPTIONS: None preset no -v options are required. ![]() However, let’s suppose our ATA/SATA drive is not in the database. ![]() In that case, the attributes’ names displayed in the ATTRIBUTE_NAME column and the format of the raw attributes shown in the RAW_VALUE column may be incorrect. Self-TestsĬopyright (C) 2002-19, Bruce Allen, Christian Franke, = START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION = Luckily, the essential drive health monitoring/testing functionality of Smartmontools does not depend upon the database. ![]()
0 Comments
Leave a Reply. |